Do It Yourself Kitchen Plumbing
Plumbing can be a tricky business and you need to on your toes to avoid any mishaps. If there is any problem in the plumbing set up of your kitchen, your daily life will be largely disrupted because you will not be able to access clean water.
The Top DIY Kitchen Tips
While it is always sensible to call licensed plumbers from www.proplumberbrisbane.com.au if there is a major issue, you can also try DIY plumbing.
If you aren’t handy with tools and not sure how to go about it, start by following a few simple tips. All you need to do is devote some time.
Use pipe insulation whenever possible
If your kitchen sink sprayer is not working smoothly and you are having to manoeuvre the hose, then it might be a case of sprayer snarls. This happens when the hose gets caught with shutoff valves causing friction.
An easy solution is to install a foam pipe insulation over the shutoff handles and even the pipes. In case you notice that it is slipping off, use tape to hold it in place. You will find these pipes in most repair shops.
Coat pipes in adhesive-backed felt
With the temperature differences in water, there is metallic expansion and contraction in the pipe system. Running hot water, especially, can lead to copper pipes expanding causing them to grind against the pipe hangers and joists which can cause problems.
Purchase some adhesive-backed felt at your nearest hardware store and divide it into small strips. Coat the pipes with them after removing the hangers one by one. Refasten the hanger before use.
Reduce the intensity of sounds using some expanding foam
If you have two stainless steel sink basins side by side, then this easy solution will help you. By using expanding foam, you will be able to deaden the vibrations and consequently reduce the gong effect caused by the proximity of the sinks.
While the process is easier before the sinks are installed, you can also do this DIY project after the sinks are in place. You just have to put the foam, wait for it to harden and then get rid of any excess using a knife.
Use a plunger before removing a sink trap
If you want to remove your sink trap, then it is ideal that you give the drain some plunges using a toilet plunger.
As a result, most of the water will flow out of the trap, and you will not have to clear up a huge mess thereafter. In case you have a double sink, plug the other drain so that the air pressure does not hamper your work.
5. Don’t Hesitate to Go In for An Expert
As you start to get an idea of plumbing, you will be able to undertake even complex DIY projects. A word of caution though, if you’re unsure about something it is always a good idea to call in a reliable plumber. Things can go wrong easily when it comes to plumbing, and you wouldn’t really want a flooded home.